The Solvent Recovery Skid, offered in two options (100L/hr & 300L/hr), takes the heated wash solution from the Heated Filtration Skid and evaporates the ethanol separating it from the cannabinoids. This skid produces crude oil and recovers clean ethanol which can be used again in the extraction process.

Key Features

  • Closed Loop System Designed for Safety

  • 100L or 300L LPH Continuous Solvent Recovery Options

  • 90-95% Ethanol Recovery

  • Rising Film Technology for Minimal Cannabinoid Degradation

  • Touch Screen Operated with Automated Startup Procedure

  • UL Hazardous Location Controls with Air Purged Control Panel

  • Proudly Engineered and Fabricated in Denver, Colorado, USA

  • Vacuum Lose and Feed Tank Completion Safeties

  • Discharge Gear Pumps for Ethanol and Crude Oil

  • Six Temperature Thermocouples to Monitor System

  • Flow Meter for Measuring Current Speed and Batch Totals

  • Ethanol and Heptane Compatible

  • Third Party Engineer Peer Reviewed

  • Built to Food Sanitary Standards

  • GMP Compliant

Throughput

The SRS designed to RECOVER SOLVENT FAST, 100L/hr or 300L/hr (depending on model) and feed rate (up to) 100/1/hr.

Footprint

With a base footprint of roughly 8′ x 4′ The SRS was designed to fit in all current and future ethanol extraction facilities. The manageable footprint makes it easy for a single technician to operate.
100 LPH System: 96″ x 43″ x 95″
300 LPH System 113″ x 43″ x 100″

Certified

The SRS is third party engineer Peer Reviewed. The control panel is UL Listed and all electrical components are CID1. U.S. Steel. ASME. GMP compliant.

Includes

  • Training and Install Support

  • C1D2 UL Listed & Approved Electronics

  • Touch Screen Controlled Panel

  • Ethanol Condensing: Ethanol Chiller

  • Training and Install Support

  • C1D2 UL Listed & Approved Electronics

  • Touch Screen Controlled Panel

  • Ethanol Condensing: Ethanol Chiller

Recommended Add-Ons

Utility Requirements

  • General Maintenance Kit: Gear Pump Heads, Vacuum Pump Rebuild Parts, Steam Components, and Check Valves

  • Continuous Dual Stage for In-Line and Continuous Decarboxylation

  • Heated Filtration Skid for Solution Prep before Evaporation

  • Ethanol Evaporation: Sussman Steam Boiler

  • Control Panel Power 208-240V (3Phase)

  • Ancillary Options 208V, 240V, or 480V (3 Phase)

  • C1D2 Rated Environment

  • Ancillary Plumbing Supplied by Licensed Technician Per Local and National Codes

  • Air Compressor Providing 8 CFM at 80 PSI

System Size

  • 100 LPH System: 96″ x 43″ x 95″

  • 300 LPH System: 113″ x 43″ x 100″