The Inline Chilling Skid continuously chills 200 gallons of ethanol supplying 60 gallons per hour of -40°C solvent to feed into the AES for extraction. It consists of 2 tanks; a 200 gallon insulated holding tank where ethanol is stored prior to entering the AES and a 90-gallon recirculation tank that holds the discharged ethanol while the operator removes and refills material bags.

Key Features

  • Closed Loop System Designed for Safety

  • Pairs with Ethanol Extraction Skid

  • Fully Automated w/ Touch Screen for Adjustments to Chilling Cycle

  • 60 Gallons of Solvent Chilling Per Hour to -40C

  • 200 Gallons of Clean Solvent Storage

  • Ethanol and Heptane Compatible

  • UL Hazardous Location Controls

  • Third Party Engineer Peer Reviewed

  • Proudly Engineered and Fabricated in Denver, Colorado, USA

  • Built to Food Sanitary Standards

  • GMP Compliant

Throughput

The EFR is able to process 30-60 lbs of Biomass per hour with batch run times of 15 minutes. Not only is The EFR designed to run FAST, but the BUILD QUALITY will ensure your machine will operate safely and efficiently for years to come.

Footprint

With a base footprint of roughly 8′ x 4′ The ICS -40 was designed to fit in all current and future ethanol extraction facilities. The manageable footprint makes it easy for a single technician to operate.

SYSTEM DIMENSIONS: 96.0″ x 48.0″ x 98″

Certified

The EFR is third party engineer Peer Reviewed. The control panel is UL Listed and all electrical components are CID1. U.S. Steel. ASME. GMP compliant.

Includes

  • 200 Gallon Insulated Holding Tank for Clean Ethanol

  • 90 Gallon Dimple Jacketed Holding Tank for Solution during Material Changes on Extractor

  • Feed Pump for Filling Clean Ethanol Holding Tank from External Storage

  • 200 Gallon Tank Level Sensor and Over Fill Protection

  • Plate Exchanger for Clean Ethanol Chilling

  • Ultra-Low Temp Chiller

Utility Requirements

System Size

  • Control Panel Power: 208V-240V (3 Phase)

  • Ancillary Options: 208V, 240V, or 480V (3 Phase)

  • C1D2 Rated Environment

  • Ancillary pluming supplied by Licensed Technician per Local and National Codes

  • Air Compressor Providing 5 CFM at 80 PSI

  • 96″ x 48″ x 98″